Connecting your Wurmer OBD2 adapter to your vehicle is a straightforward process, whether you’re using a Bluetooth or WiFi enabled device. This guide will walk you through the necessary steps for both connection types, ensuring you can quickly access your vehicle’s diagnostic data.
1. Bluetooth OBD2 Adapter Connection
For users opting for a Bluetooth connection, follow these steps to get your Wurmer OBD2 adapter paired and ready to use:
-
Locate the OBD2 Port: Begin by finding the OBD2 port in your vehicle. This is typically located within the driver’s area, often under the dashboard. The exact placement can vary depending on your car’s make and model, so consult your vehicle’s manual if needed.
-
Insert the Wurmer OBD2 Bluetooth Adapter: With your vehicle turned off, plug the Wurmer OBD2 Bluetooth adapter into the OBD2 port. Ensure it’s securely connected.
-
Start Your Vehicle’s Engine: Turn on your car’s engine. This powers up the OBD2 system and your adapter, making it discoverable for pairing.
-
Access the Connect Screen in Your App: Open your chosen OBD2 application on your smartphone or tablet. Navigate to the connection settings or a screen labeled “Connect.” In many apps, this is found under an “OBD2” menu option. Look for a button that initiates a Bluetooth connection, often labeled “Connect (Bluetooth).”
-
Select Your Bluetooth Device: Upon clicking the “Connect (Bluetooth)” button, your app should display a list of available Bluetooth devices. If your Wurmer OBD2 adapter is not immediately visible, use the “Scan for devices” option within the app’s Bluetooth settings. Select your Wurmer OBD2 adapter from the list. If prompted for a PIN, refer to the documentation that came with your Wurmer OBD2 adapter; common PINs include “1234” or “0000”.
2. WiFi OBD2 Adapter Connection
If you prefer a WiFi connection for your Wurmer OBD2 adapter, these steps will guide you through the setup:
-
Locate the OBD2 Port and Insert the Wurmer OBD2 WiFi Adapter: Similar to the Bluetooth setup, first locate the OBD2 port in your vehicle and plug in your Wurmer OBD2 WiFi adapter. Make sure it is firmly in place.
-
Start Your Vehicle’s Engine: Turn on your car’s engine to power the OBD2 system and activate your WiFi adapter.
-
Connect to the OBD2 Adapter’s WiFi Network: Before launching your OBD2 app, you need to connect your smartphone or tablet to the WiFi network broadcasted by the Wurmer OBD2 adapter. Go to the WiFi settings on your device.
-
Choose the OBD2 WiFi Device: From the list of available WiFi networks, select the network name associated with your Wurmer OBD2 WiFi adapter. This name is usually indicated in the adapter’s documentation or on the device itself.
-
Enter the WiFi Password (If Required): If this is your first time connecting, you may be asked for a password. This password is provided by the manufacturer of your Wurmer OBD2 adapter and is typically found in the product documentation. Common passwords include “12345678” or “password.” Enter the correct password to join the WiFi network.
-
Access the Connect Screen in Your App and Choose WiFi Connection: Open your OBD2 application and navigate to the connection screen, usually accessible via an “OBD2” button in the main menu. This time, select the “Connect (WiFi)” option.
-
Specify Host and Port Details: For WiFi connections, you’ll likely need to enter the Host (IP Address) and Port Number of your Wurmer OBD2 adapter within the app. These details are provided by the adapter’s manufacturer. Common default settings are an IP address like “192.168.0.10” and a port number such as “35000.” Enter these details as provided and click the “Connect” button.
By following these steps, you should be successfully connected to your Wurmer OBD2 adapter, ready to utilize its features and access your vehicle’s data through your chosen OBD2 application. Ensure you consult your Wurmer OBD2 adapter’s manual for any specific instructions or default settings related to your particular device.
