The Veepeak OBDCheck BLE+ is a popular car diagnostic code reader, known for its Bluetooth connectivity and user-friendly interface. To get the most out of your Veepeak OBD2 scanner, understanding how to properly connect it to your devices and utilize compatible apps is crucial. This guide serves as your Veepeak Obd2 Manual companion, providing step-by-step instructions to ensure a seamless setup and effective car diagnostics.
Connecting your Veepeak OBDCheck BLE+ Car Diagnostic Code Reader Scan Tool to your smartphone or tablet is straightforward. Follow these instructions to get started:
Step 1: Install a Compatible OBD2 App
To use your Veepeak OBD2 manual effectively, you’ll need to install a third-party application on your mobile device. These apps act as the interface for reading and interpreting the data from your vehicle.
-
For iOS (iPhone/iPad):
- Car Scanner ELM OBD2 (Free): A widely recommended free app with robust features.
- OBD Fusion: A paid app offering advanced diagnostics and customization.
- DashCommand: Another popular paid option known for its user-friendly dashboards and data visualization.
- Important Note: Torque Pro from the Apple App Store is not compatible with Veepeak OBD2 scanners.
-
For Android Phones and Tablets:
- Torque Lite (Free) or Torque Pro (Paid): Popular choices for Android users, offering real-time data and customization.
- OBD Fusion: Available on Android as well, providing a consistent experience across platforms.
- Car Scanner ELM OBD2: The free app is also available for Android, ensuring broad compatibility.
Step 2: Locate the OBD2 Port and Plug in the Veepeak Device
The OBD2 port is typically located inside your vehicle’s cabin, often under the dashboard on the driver’s side. Refer to your car’s owner’s manual if you are unsure of its exact location.
- Once located, carefully plug the Veepeak OBD2 adapter into the OBD2 port.
- Ensure it is securely connected and fits snugly.
- After plugging in, check your phone’s Bluetooth settings to see if the Veepeak device appears in the list of available devices.
- If the Veepeak scanner does not appear, check your vehicle’s cigar lighter fuse as it may power the OBD2 port. Alternatively, try the device in another vehicle to rule out any issues with the scanner itself.
Step 3: Turn on the Ignition
To power the Veepeak OBD2 reader and allow it to communicate with your car’s computer, you need to turn on your vehicle’s ignition.
- For vehicles with a standard key ignition, turn the key to the “ON” position, just before starting the engine.
- For vehicles with a push-button start, press the start button once or twice without pressing the brake pedal. This will activate the vehicle’s accessory mode and power the OBD2 port. Consult your specific car manual for detailed instructions on accessory mode activation.
Step 4: Enable Bluetooth on Your Device and Pair (Android Only)
Enable Bluetooth on your smartphone or tablet. The pairing process differs slightly between iOS and Android devices:
-
For iOS Devices (iPhone/iPad): Do NOT attempt to pair with “VEEPEAK” within the iOS Bluetooth settings. The connection is established directly through the OBD2 app using Bluetooth LE (Low Energy). Proceed directly to Step 5.
-
For Android Devices: Pair with the Veepeak OBD2 device from your Android Bluetooth settings. When prompted for a PIN, enter 1234. The device should now be paired or connected.
Step 5: Launch the OBD2 App and Configure Connection Settings
- Open your chosen OBD2 app on your phone or tablet.
- Navigate to the app’s settings or connection/adapter settings menu.
- Within the app’s connection settings, select the appropriate connection type:
- For iOS: Choose Bluetooth LE or Bluetooth 4.0.
- For Android: Select Classic Bluetooth.
- The blue light on your Veepeak OBD2 scanner should begin flashing, indicating it is attempting to connect.
- Follow the app’s on-screen prompts to finalize the connection to your Veepeak OBD2 adapter.
Important Notes for Veepeak OBD2 Scanner Users:
- Bluetooth Connection: The Veepeak OBDCheck BLE+ uses Bluetooth for communication, not WiFi.
- Third-Party App Required: A compatible third-party app is essential to utilize the Veepeak OBD2 scanner. The device itself does not have a built-in interface.
- Unplug When Not in Use: It is recommended to unplug the Veepeak OBD2 reader when you are not actively using it to prevent battery drain, although the device is designed for low power consumption.
- Drive Safely: Always prioritize safe driving. Only operate the OBD2 app and view data when it is safe to do so and in compliance with local traffic laws.
- OBD2 Limitations: OBD2 diagnostics are primarily designed for emission-related engine issues. While the Veepeak OBD2 scanner can read many trouble codes, it may not access all systems in your vehicle (such as ABS, airbag, TPMS). Access to these systems often requires manufacturer-specific protocols and specialized apps.
For more detailed information, troubleshooting tips, and advanced features, always refer to the complete VEEPEAK OBDCheck BLE+ Car Diagnostic Code Reader Scan Tool User Manual. You can usually find the Veepeak OBD2 manual PDF online on the official Veepeak website or through authorized retailers. This guide provides a quick start, but the full Veepeak OBD2 manual download will offer comprehensive details for optimal usage of your device.
