For BMW and Mini enthusiasts looking to unleash the hidden potential of their vehicles, the BimmerCode app is a powerful tool. Combined with a reliable OBD2 adapter like Veepeak, you can access and customize various settings directly from your smartphone. This guide focuses specifically on connecting your Veepeak OBD2 adapter with the BimmerCode app on your iPhone, ensuring a smooth and successful connection every time. Please note that BimmerCode supports BMW and Mini models, with G series and pre-2008 models currently not supported. Always verify your vehicle’s compatibility and adapter compatibility at https://bimmercode.app/cars before proceeding.
Connecting your Veepeak OBD2 adapter to your iPhone for use with the BimmerCode app is a straightforward process, but requires careful attention to a few key steps to ensure a stable Bluetooth connection. Follow these instructions to get connected and start coding:
Step-by-Step Guide for iOS (iPhone):
-
Prepare Your Vehicle and Adapter: Begin by plugging your Veepeak OBD2 device into the OBD port of your car. This port is typically located in the driver’s side footwell area. Once plugged in, turn on your car’s ignition to power up the OBD2 adapter.
-
Activate Airplane Mode on Your iPhone: Enable Airplane Mode on your iPhone. This is crucial for a stable connection as it minimizes interference from other wireless signals. You can do this through the Control Center or in the Settings app.
-
Enable Bluetooth: With Airplane Mode active, manually turn Bluetooth back on. This allows your iPhone to connect specifically to the Veepeak adapter while keeping other connections disabled.
-
Disable Wi-Fi: Turn off Wi-Fi on your iPhone. Similar to Airplane Mode, disabling Wi-Fi helps to streamline the connection process and prevent conflicts.
-
Disable CarPlay: CarPlay can sometimes interfere with the OBD2 adapter connection. Disable CarPlay by navigating to “Settings” > “General” > “CarPlay”. If your car is listed, select it and choose “Disable CarPlay”.
-
Disconnect from iDrive (BMW/Mini Infotainment): If your iPhone is currently connected to your car’s iDrive system via Bluetooth, you need to disconnect it. Go to “COM” > “Mobile devices” in your iDrive menu. Select your device and choose “Disconnect device”.
-
Disconnect Other Bluetooth Devices: Ensure any other Bluetooth devices that might be connected to your iPhone are disconnected. This minimizes potential interference and ensures the Veepeak adapter is the primary Bluetooth connection.
-
Maintain Proximity: Keep your iPhone as close as possible to the Veepeak OBD2 adapter during the connection process. A short distance helps to maintain a strong and stable Bluetooth signal.
-
Configure BimmerCode App Settings: Open the BimmerCode app on your iPhone. Navigate to the app’s “Settings” menu. Within settings, locate the “Adapter type” option and select “Veepeak OBDCheck BLE” or “Veepeak OBDCheck BLE+”. Choose the option that corresponds to your specific Veepeak adapter model.
-
Connect in the BimmerCode App: Return to the BimmerCode app’s start screen. Tap the “Connect” button. The app will now attempt to establish a connection with your Veepeak OBD2 adapter. If you’ve followed all the steps correctly, the app should successfully connect, and you can begin coding your BMW or Mini.
Important Considerations:
- Adapter Compatibility: Always double-check that your Veepeak OBD2 adapter model is listed as compatible with the BimmerCode app and your specific car model on the BimmerCode website.
- Bluetooth Version: Veepeak OBDCheck BLE and BLE+ adapters use Bluetooth Low Energy. Ensure your iPhone supports Bluetooth LE for seamless connectivity.
- Troubleshooting: If you encounter connection issues, re-verify each step in this guide. Ensure Bluetooth is enabled after Airplane Mode, and that Wi-Fi and CarPlay are disabled. Restarting your iPhone and the car’s ignition can also sometimes resolve connection problems.
By following these detailed steps, connecting your Veepeak OBD2 adapter to the BimmerCode iPhone app should be a trouble-free experience, allowing you to enjoy the full customization capabilities of your BMW or Mini vehicle. For further assistance and more detailed information, refer to the Apps Guide Page on the BimmerCode website.
