Effortless Parking Mode: The Thinkware OBD2 Power Cable for Simple Setup

Tired of complicated hardwiring kits just to enable parking surveillance on your Thinkware dashcam? The Thinkware Obd2 Power Cable offers a revolutionary “plug and play” solution, providing constant power to your dashcam directly through your vehicle’s OBD-II port. This eliminates the need for professional installation and intricate wiring, allowing you to easily activate parking mode and enjoy 24/7 protection for your vehicle.

Ditch the Hardwiring: Installation is a Breeze

Forget about complex panel removals, fuse tapping, and the stress of hardwiring. The Thinkware OBD2 power cable is designed for ultimate ease of use. Simply locate your vehicle’s OBD-II port – typically found under the dashboard on the driver’s side – and plug in the cable. It’s that simple! No specialized tools or automotive electrical knowledge required. This seamless integration instantly unlocks the built-in Parking Surveillance Mode on your compatible Thinkware dashcam, making advanced protection accessible to everyone.

Unlock 24/7 Parking Surveillance with Four Advanced Modes

Once connected, the Thinkware OBD2 cable powers your dashcam even when your engine is off, enabling comprehensive parking surveillance. After a brief 2.5-minute delay to accommodate vehicles with stop/start technology, your Thinkware dashcam will automatically activate Parking Mode, offering four distinct recording options:

Motion Detection: Capture Events as They Happen

In Motion Detection mode, your Thinkware dashcam intelligently monitors for movement around your parked vehicle. If any motion is detected, the camera instantly wakes up and begins recording a 20-second clip, capturing potential incidents like someone approaching your car or nearby traffic events.

Impact Detection: Protect Against Collisions and Vandalism

The integrated Active Impact Monitoring System utilizes a 3-axis G-Sensor to detect any bumps or impacts to your vehicle. Upon detecting an impact, the dashcam automatically saves a buffered video clip, recording ten seconds before and ten seconds after the event. This ensures you have crucial footage of any collisions, parking lot incidents, or vandalism attempts.

Time Lapse Mode: Extended Recording, Efficient Storage*

For extended parking surveillance, Time Lapse mode maximizes recording duration by capturing footage at a reduced frame rate. Recording at 2 frames per second without audio, Time Lapse condenses long periods into shorter, easily reviewable videos. For example, a 10-minute period is compressed into a 15-second video file, saving valuable storage space on your microSD card.

Energy Saving Mode: Smart Power Management for Long Parking Sessions*

Energy Saving Mode is designed for situations where your vehicle will be parked for extended periods. In this mode, the dashcam enters a sleep state, minimizing power consumption. However, it remains vigilant, and if the built-in G-sensor detects an impact, the dashcam instantly wakes up and records a 20-second clip, ensuring crucial events are captured while conserving battery power.

*Available on Select Dash Cams

Important Compatibility Note: Hybrids and Electric Vehicles

While the Thinkware OBD2 Power Cable offers broad compatibility, it’s important to note a potential limitation. Due to the unique powertrain configurations of hybrid and electric vehicles, this cable may not be fully compatible with all hybrid and full electric cars and trucks. Therefore, we do not recommend purchasing this OBD2 cable for vehicles such as the Chevy Volt, Tesla Model 3, Toyota Prius, and similar models.

For hybrid and electric vehicle owners who wish to enable Parking Mode functionality on their Thinkware dashcam, we recommend using the [Thinkware Direct-Wire Hardwiring Kit](Thinkware Direct-Wire Cable) (sold separately). This direct-wire kit provides a reliable power source for Parking Mode in these vehicles.

Technical Specifications

Here are the detailed specifications of the Thinkware OBD2 Power Cable:

Model: TWA-OBD2
Length: 9.84 feet (3 meters) – Provides ample length for discreet cable routing.
Weight: 0.1875 lbs
Number of Pins: 16 – Standard OBD-II connector pinout.
Cable Type: Thinkware Specific – Engineered for optimal performance with Thinkware dashcams.
Connector Gender: Male-to-Male
Maximum Voltage: 16 Volts (DC)
Connector Type: DC Jack / OBD-II Port

Thinkware Dashcam Compatibility List

This OBD2 power cable is compatible with a wide range of Thinkware dashcam models, including:

* Please note: This OBD2 power cable is not compatible with Thinkware F550 or F790 Dash Cam models.

Purchase with Confidence from an Authorized Thinkware Distributor

When you purchase your Thinkware OBD2 Power Cable from The Dashcam Store™ (obd2global.com), you are buying from an authorized distributor of Thinkware dashcams and accessories in the United States. Avoid the risks associated with unauthorized or grey-market sellers and ensure you receive a genuine Thinkware product backed by reliable support and warranty.

Upgrade your Thinkware dashcam experience today with the Thinkware OBD2 Power Cable and enjoy effortless parking surveillance!