The EcoOBD2 performance chip is a popular plug-and-play device designed to enhance your car’s fuel efficiency and performance. This easy-to-install module connects to your vehicle’s OBD2 port and optimizes engine control unit (ECU) settings to improve mileage and power. A key feature of the EcoOBD2 is its reset button, a small but crucial component for proper installation and operation. Understanding the function and location of this reset button on your EcoOBD2 device is essential for a smooth setup and to maximize its benefits.
EcoOBD2 chips are known for their user-friendliness and affordability, making them an accessible upgrade for many car owners. They offer a simple way to potentially increase fuel efficiency by up to 15% and are compatible with most cars equipped with an OBD2 port. These chips are designed to be safe for your engine, equipped with protection functions and often come with warranties, providing peace of mind.
Before installing your EcoOBD2 chip, it’s important to locate your car’s OBD2 port. Typically, this port is found under the steering wheel column. It’s often black or white and easily accessible. If you are unsure of the exact location, you can check online resources like http://bit.ly/2FJ5DgZ for a visual guide.
Once you have located the OBD2 port, the installation process is straightforward and quick, primarily revolving around the use of the reset button on the EcoOBD2. Here’s a step-by-step guide:
- Turn off your car’s ignition and remove the key.
- Plug the EcoOBD2 chip into the OBD2 port.
- Insert the key into the ignition and turn it to the ACC (Accessory) mode – usually one click to the right. Do not start the engine yet.
- Locate the reset button on your EcoOBD2 chip. It is a small pinhole, typically situated above the EcoOBD2 logo.
- Press and hold the reset button for approximately 5 seconds. You can use a paperclip or a similar small object to gently press the button.
- Release the reset button and wait for 30-40 seconds. During this time, the EcoOBD2 chip establishes communication and connects with your car’s ECU to begin the optimization process.
- Start your car engine.
That’s it! The installation and calibration are now complete. The reset button on the EcoOBD2 initiates the crucial communication and setup phase, allowing the chip to effectively tune your vehicle for improved performance or fuel economy.
Frequently Asked Questions about EcoOBD2 and the Reset Button
Q: Will using the reset button again affect my car or the EcoOBD2 chip?
A: Generally, you only need to use the reset button on your EcoOBD2 during the initial installation. However, if you unplug and replug the device, or experience issues, pressing the reset button again can help re-establish the connection with the ECU. It is safe to use the reset button as needed during troubleshooting but avoid unnecessary repeated resets.
Q: Is the EcoOBD2 chip compatible with my car?
A: Compatibility depends on whether your car has an OBD2 port. Most cars manufactured after 1996 are equipped with OBD2 ports. Check for the OBD2 port location as described earlier. The EcoOBD2 is designed to be universally compatible with OBD2 compliant vehicles.
Q: Will the EcoOBD2 void my car’s warranty?
A: No, the EcoOBD2 is designed as a plug-and-play device that does not permanently alter your car’s ECU. When unplugged, your car reverts to its factory settings, meaning it will not void your warranty.
Q: Is it safe for my vehicle’s engine?
A: Yes, EcoOBD2 chips are designed with engine safety in mind. They are programmed to optimize engine performance within safe limits and are not intended to exceed the manufacturer’s specifications, ensuring engine protection.
Q: What if I encounter fake EcoOBD2 chips?
A: Be cautious of counterfeit products circulating online. Purchase EcoOBD2 chips from reputable sources to ensure you receive a genuine and safe product that functions as intended.
In conclusion, the EcoOBD2 chip offers a simple and reversible way to potentially improve your vehicle’s fuel economy and performance. The reset button on the EcoOBD2 is a critical element for the installation process, ensuring proper communication with your car’s ECU. By understanding its function and following the correct installation steps, you can effectively utilize the EcoOBD2 chip and enjoy its potential benefits.
